Moduł adaptera Wi-Fi OPEN-SMART USB do ESP8266 ESP-01S LINK V2.0 z sterownikiem 2104
Część recenzji została przetłumaczona automatycznie.
Przybył cały i zdrowy. Pierwsze wrażenie było ciepłe, jak płyta wygląda tandetnie, ale to był tylko niemyty strumień. Istnieje poręczna strzałka, która pomoże Ci w podłączeniu ESP01s we właściwy sposób, i uważaj, że jest bardzo łatwo się pomylić. Aby użyć go jako programatora dla Arduino IDE, wystarczy dodać prosty przełącznik pomiędzy IO0 i GDD, aby włączyć go do trybu flash. Proste.
I plan to use this adapter for ESP 8266 - 01. It looks OK, but there are missing any instructions. I have found driver on internet, so the driver in my PC is OK. Adapter itself could be OK, there is 5V to 3.3V conversion, but I was not able to upload software to ESP 01 board. Missing switch GPIO0 to GND (for software upload). My ESP01 module was not S type, so maybe this was a problem.
....
While plug using 3 different item ESP8266 the unit overheat need to remove quick
For this Programmer the ESP-Module has to be placed outwards. For me the standard DTR/CTS control for programming is not working using Arduino IDE! First of all I had to solder a pullup resistor between VCC and the CD_PD pin. To put the ESP-01 in programming mode GPIO has to be pulled to ground (soldered a jumper to the pin) followed by pressing the Reset button. For Nral opreation the Jumper should be removed again.
Ottimo prodotto funziona correttamente
Przybyli w dobrych warunkach
Wykonuje swoją pracę
Przydatne dla ESP01s
DOBRZE POSŁUCHAĆ